久久婷婷丁香五月色综合啪

Hello! Welcome to Hebei Zeqi instrument and Equipment Co., Ltd., we will serve you wholeheartedly!
Customized Hotline fifteen billion eight hundred and thirty-three million seven hundred and eighty-nine thousand and two
 Cement soft scouring instrument

Cement electric bending tester

Release time: October 23, 2016 popularity: four hundred and six

Dkz-5000 / 6000 cement electric bending tester

   Structure of cement electric bending tester: the tester consists of base, column, upper beam, long and short pull rod, large and small lever, angle indicator board, bending fixture, swimming weight, size balance, transmission motor, driving screw, and electrical control box.

Dkz-5000 / 6000 cement electric bending testing machine is used to determine the flexural strength of cement and other non-metallic brittle materials.  

Dkz-5000 / 6000 cement electric bending tester It meets the requirements of GB / t17671, gb3350, bs4550 and iso679.   

Dkz-5000 / 6000 cement electric bending tester Main technical parameters:

   The maximum test force is 1000N with single lever
   5000n / 6000N for parallel bars
   Indication accuracy ± 1%
   Horizontal bar output ratio 10:1
   The output ratio of parallel bars is 50:1
   Loading rate (double lever) 50N / S
   Bending fixture
   The diameter of loading roll and support roll is Ф 10 ‰
   Support roll spacing 100 ± 0.1 mm
   Diaphragm spacing 46 mm
   Net weight ≈ 85 kg

Dkz-5000 / 6000 cement electric bending tester Operation steps:

   1. Operating room temperature: 20 ± 2 ℃, relative humidity > 50%.
   2. Turn on the power supply and adjust the zero point (adjust the balance weight mound so that the balance weight is at the "0" position and the main lever is horizontal).
   3. Remove the debris on the fixture, put the specimen into the bending fixture, adjust the fixture to clamp the specimen, and make the main lever produce an elevation angle.
   4. Start the button and read the bending strength value after the specimen is broken.
   5. Press the button on the ram and push the ram back to "0".
   6. Keep the instrument clean and dry. There should be no oil sticking between the blade and the blade.

 Cement electric bending tester

comment

publish

fifteen billion eight hundred and thirty-three million seven hundred and eighty-nine thousand and two